Technical Specifications:

• Model: IMCOS-3000
• Type: PLC Card
• Up to 34 microcontrolled Inputs/Outputs to manage the IMCOS system
• Management of up to 15 slave boards (IMCOS-3000/IMCOS-3020) to increase relay capacity and interconnect other systems such as Talk Back
• 2 RS-232/RS485 interfaces for digital connection with peripherals and system programming
• Master, Back-up and Slave mode operations selected through Dip-Switches
• FAIL-SAFE operation mode to allow signal flow even in case of relay fault
• Priority management between emergency messages from panels and alarm signals
• Mounting: 19″ rack, with mounting support
• Power supply: 24 V DC
• Power consumption: 10 W
• Dimensions: 216 x 190 mm
• Relay capacity: 34 Input/Output (typical value: 10 inputs & 20 outputs reserved for internal use)
• Manufacturer: Gitiesse

Το άρθρο Gitiesse IMCOS-3000 PLC Microcontroller Board for PAGA and TB V1 εμφανίστηκε πρώτα στο Θ.ΦΙΛΙΠΠΙΔΗΣ & ΥΙΟΙ Ε.Ε..

Technical Specifications:

• Type: Electronic PCB (alarm tone generator)
• Function: Generates up to 2 alarm tones with logic priority management of speech signals
• Standard tone: Fire / General alarm at 2000Hz
• Customized tone available on request
• Part of controller assembly: IMCOS-3002 (via IMCOS-7P connector PCB)
• Signal output feeds line preamplifier: IMCOS-8210
• Type approved by marine class societies
• Product code: IMCOS-1000
• Manufacturer: Gitiesse

Note: not to be confused with IMCOS-1001, a related but different tone generator & audio equalizer card that also plays pre-recorded MP3 messages from an SD card.

Το άρθρο GITIESSE IMCOS-1000 Alarm Tone Generator PCB εμφανίστηκε πρώτα στο Θ.ΦΙΛΙΠΠΙΔΗΣ & ΥΙΟΙ Ε.Ε..

Type approved for marine application by ABS, CCS, DNV-GL, LR, RINA, BV.

Technical Specifications:

• Model: IMCOS-1515-110
• Power supply: 110 VAC ±10%, 50/60Hz / 24 VDC ±10% (option)
• Output power: 4 x 100W RMS
• Output line: 100 Volts
• Peak consumption: 4.9A @110Vac, 22A @24Vdc
• Efficiency: better than 85%
• Input sensitivity/impedance: 4x770mVrms/27kΩ unbalanced, 4x150mVrms/22kΩ balanced
• Signal to noise ratio: >60dB
• Dimensions: 485 x 132 x 250 mm (3U 19″ rack)
• Weight: 12 kg
• Material: Aluminium (front panel), galvanized steel sheet (body)
• Colour: RAL 9005
• Forced ventilation by two thermostat-controlled fans
• RS485 bus for alarm communication and equipment control
• 4 separate volume controls (hardware or software via RS485)
• Manufacturer: Gitiesse

Το άρθρο Gitiesse IMCOS-1515-110 Power Amplifier 110V AC/24V DC 4x100W εμφανίστηκε πρώτα στο Θ.ΦΙΛΙΠΠΙΔΗΣ & ΥΙΟΙ Ε.Ε..

Type approved for marine application by ABS, CCS, DNV-GL, LR, RINA, BV.

Technical Specifications:

• Model: IMCOS-1515-220
• Power supply: 220 VAC ±10%, 50/60Hz / 24 VDC ±10%
• Output power: 4 x 100W RMS
• Output line: 100 Volts
• Peak consumption: 2.6A @220Vac, 22A @24Vdc
• Efficiency: better than 85%
• Input sensitivity/impedance: 4x770mVrms/27kΩ unbalanced, 4x150mVrms/22kΩ balanced
• Signal to noise ratio: >60dB
• Dimensions: 485 x 132 x 250 mm (3U 19″ rack)
• Weight: 12 kg
• Material: Aluminium (front panel), galvanized steel sheet (body)
• Colour: RAL 9005
• Forced ventilation by two thermostat-controlled fans
• RS485 bus for alarm communication and equipment control
• 4 separate volume controls (hardware or software via RS485)
• Manufacturer: Gitiesse

Το άρθρο Gitiesse IMCOS-1515-220 Power Amplifier 220V AC/24V DC 4x100W εμφανίστηκε πρώτα στο Θ.ΦΙΛΙΠΠΙΔΗΣ & ΥΙΟΙ Ε.Ε..

Technical Specifications:

• Type: PCB card
• Mounting: Plate mounting or optional DIN rail mounting support
• Wiring: 5.08mm screw terminal blocks
• Power supply: 24V DC
• Power consumption: 2W
• 6 independent audio channels with individual status LED
• Fail-safe function with NO/NC contact
• Relay contact form: DPDT (2c), max switching current 1A
• Dimensions: 160 x 70 x 25 mm
• Weight: 0.2 kg
• Type approved by seven marine class societies
• Product code: IMCOS-2005
• Manufacturer: Gitiesse

Το άρθρο GITIESSE IMCOS-2005 Signal Relay PCB εμφανίστηκε πρώτα στο Θ.ΦΙΛΙΠΠΙΔΗΣ & ΥΙΟΙ Ε.Ε..

Technical Specifications:

• Model: IMCOS-2101-V2
• Display: 4×20 LCD with adjustable light intensity
• Faults monitored: loss of power, amplifier fault, controller fault, main control unit fault
• Built-in sounder for audio notification
• Resettable/non-resettable interface to ship’s automation
• Power supply: Primary 220/110 VAC 50/60Hz, Secondary 24 VDC
• Material: Coated Aluminium RAL 9005 (panel)
• Mounting: 19″ standard rack, 2 units
• Weight: ~1 kg
• Wiring: Terminal strip on the back
• Inputs: 20 voltage/voltage-free contacts (dip-switch selected, 24Vdc), 6 voltage AC/DC inputs (dip-switch selected), 3 remote alarm panel inputs
• Outputs: non-resettable NC contact, resettable NC contact, common fault NC/NO contact, spare NC/NO contact
• Front handles available as option
• Manufacturer: Gitiesse

Το άρθρο Gitiesse IMCOS-2101-V2 Alarm Monitor εμφανίστηκε πρώτα στο Θ.ΦΙΛΙΠΠΙΔΗΣ & ΥΙΟΙ Ε.Ε..